Can the Bathroom Heater and Ventilation System Be Used Simultaneously?

To obtain a greater at ease enjoy all through showering, most of the people set up a rest room heater (yuba) in their lavatories. while using it, taking note of a few details can decorate the revel in. under, i can explain whether the nice and cozy air and air flow capabilities of the toilet heater can be used concurrently.

Can the warm air and air flow of the toilet heater be used at the identical time?

No, they can't be used simultaneously. the nice and cozy air and air flow functions use the same motor. ventilation blows air outwards, even as warm air blows in the direction of the interior of the room. The exhaust uses a centrifugal impeller, while the warm air characteristic uses an axial waft impeller. these functions are applied with the aid of converting the route of the motor. consequently, it isn't possible to use warm air and ventilation on the identical time.

how to preserve the bathroom heater?

1. After the use of the toilet heater, you need to no longer flip it off immediately. You need to first ventilate the rest room and take away the humidity earlier than turning off the heater. This facilitates prevent water vapor from coming into the heater and inflicting needless harm. moreover, make sure that the bathroom is properly-ventilated and dry to extend its service lifestyles.

2. in the course of the operation of the toilet heater, keep away from splashing water on it. even though it is designed to be, the interior of the mild isn't water-proof. this will result in brief circuits and pose a chance of electrical shock to users, developing pointless issues.

3. while shopping a lavatory heater, be aware of the thickness, which need to now not exceed the desired restrict, preferably kept around 20 cm. since it wishes to be installed at the ceiling, an additional layer is required to guide it, ensuring that the again a part of the heater is placed effectively. If the heater is just too thick, installation might be difficult.

4. while connecting the toilet heater, test whether or not the pass-sectional vicinity meets the requirements. usually, it must be capable of powering the heater for correct operation. If there are issues with the selection, it could bring about electric leakage, which is unsafe for users, specifically in older houses.

In precis：regarding whether or not the nice and cozy air and ventilation of the toilet heater can be used concurrently, the answer is not any. these functions rely upon the motor's special orientations for switching among ventilation and heat air.