Can You Replace a Floor Drain by Yourself?

The size of the floor drain may be small, but it is crucial as it connects the indoor space to the drainage pipes and serves as an important drainage channel. Over time, the floor drain can become damaged and may need to be replaced. So, can you change the floor drain yourself? What should you pay attention to when installing a floor drain? Next, I'll introduce relevant information, so let's take a look together.

Can you change the floor drain yourself?

Yes. First, use tools to remove the old floor drain and clean the surrounding sand, soil, and other debris. Then, use a paper towel or dry cloth to absorb any water around the area and clean the pipe opening. Next, place the new floor drain into the pipe opening to check if the height and size are suitable. After that, apply the prepared waterproof cement evenly around the edge and in the recess of the new floor drain. After two minutes, place the floor drain into the recess, making sure to keep it level. Insert the filtering axis into the base of the floor drain and adjust for a snug fit, and finally, put the filter net on top.

What should you pay attention to when installing a floor drain?

1. The floor drain should be installed simultaneously with the tile work. The installation of a standard floor drain is quite simple; just choose the corresponding product based on the relevant dimensions, then apply cement mortar evenly on the back of the floor drain. After that, ensure it is bonded flatly to the drainage pipe, and finally, cover it with a cap. Since the bathroom uses water frequently, it's essential to maintain a certain slope when installing the floor drain to facilitate drainage. If the floor is too level, it may lead to water pooling.

2. Before installation, clean any debris from inside the water pipe. If there are stains at the pipe opening, that also needs to be addressed. Then, cover the pipe to prevent any debris from entering and causing blockages. Next, check if the distance between the floor and the pipe is appropriate; if it's too close, you may need to cut the pipe down a bit. When installing, do not apply too thick a layer of cement around the floor drain, as it could affect the aesthetics.

In summary：the above is what I wanted to share about whether you can change the floor drain yourself and what to pay attention to when installing a floor drain. I hope this information can help some friends in need.