Home / Blog Center / Chargers / How to Fix a Broken Toilet Flush Switch: A Step-by-Step Guide

How to Fix a Broken Toilet Flush Switch: A Step-by-Step Guide

04/03/2025 | Hawkrown

The toilet is used very frequently in the home, which also makes it prone to malfunctions. So, how to fix a broken toilet switch? Let's take a look together.

How to Fix a Broken Toilet Switch

First, drain the water from the tank. There is a fixed plastic clip on the back of the switch; turn it counterclockwise to remove the screw. Then, install the new plastic component and tighten it by turning it clockwise. The operation is very simple. During the replacement process, do not apply excessive force to avoid damaging the tank.

How to Repair Common Toilet Problems

1、For various reasons, the bathroom may become clogged. You can use a plunger or a specialized toilet auger to unclog it. Alternatively, you can pour hot water mixed with caustic soda into the toilet bowl and wait for 10 minutes. If you cannot solve the problem by yourself, consider calling an expert.

2、If the flush valve inside the tank is damaged, you will need to buy a new one. Pay attention to size when purchasing to avoid buying the wrong one. During replacement, first, remove the upper part of the drain assembly, loosen the lower screws, remove the metal piece, then replace the bottom of the new water valve, put the metal piece back, tighten the screws, and install the new parts.

3、If the toilet seat is damaged due to long-term use, it can only be replaced with a new one. The installation is also quite simple; just unscrew the back of the toilet seat, remove the old seat, and attach the new one.

4、The most common issue is toilet leakage. You need to determine the cause related to the float ball. Lift the float arm and see if the water stops. If the float arm moves slightly, the float ball may be broken; in this case, you need to replace the float ball.

5、The tank ball seal may corrode, causing the toilet to leak. In this case, a new toilet should be installed, and the flush valve opening should be cleaned, as there may be a lot of dirt there.

In summary:the above is what I shared about how to fix a broken toilet switch and how to repair common toilet issues. I believe after reading the above information, you have a better understanding. For more related information, please continue to follow the Hawkrown website, and I will answer your questions one by one.

Contact Us

Submission Successful

ok