Avoiding Odor: Proper Installation of Drain Seals Explained

The bathroom and kitchen are areas with high moisture content. To ensure that water drains smoothly indoors, it is necessary to install a floor drain. In this case, choosing a deodorizing floor drain is essential to maintain indoor air quality. How to install the rubber sleeve of a deodorizing floor drain, and what should be noted during the installation of the floor drain? Let’s take a look together.

How to Install the Rubber Sleeve of a Deodorizing Floor Drain

1. Clean the dirt inside the drainpipe and dampen it with clean water.

2. Align the center of the floor drain with the drainpipe and press it down firmly.

3. Install the rubber sleeve of the deodorizing floor drain to ensure a tight connection.

4. Attach the floor drain cover and clean off any surface stains.

5. Use a sealing strip to seal the contact area of the floor drain tightly.

What to Note When Installing a Floor Drain

1. Before installing the floor drain, it is necessary to remove the internal components of the floor drain to prevent dirt from falling into the drain core during installation, which could cause blockage and lead to improper use later on. Additionally, ensure the floor drain is slightly lower than the ground level to allow water to flow into the drain properly.

2. The primary purpose of installing a floor drain in the bathroom is to direct water out of the bathroom. Therefore, the floor drain should be installed at a position lower than the floor to ensure proper drainage. If the distance between the drainpipe and the ground is relatively close, it may be necessary to cut the pipe to allow the floor drain panel to be installed correctly and not exceed the floor height.

3. During the floor drain installation, use a soft cloth to plug the drainpipe to prevent cement or mortar from falling into the pipe, causing unnecessary blockages. When installing the drain core later, you can remove the soft cloth to ensure proper construction. Additionally, if the floor drain is for a washing machine, it is best to use a special connector to prevent leaks.

In summary：this is an overview of how to install the rubber sleeve of a deodorizing floor drain and what to consider during the installation process. Is everyone clear now? The installation of a deodorizing floor drain is not difficult, but there are many details to pay attention to in order to avoid unnecessary troubles.