Floor Drain Problems? How to Remove a Stuck Core Effortlessly

Due to certain circumstances, we need to remove the floor drain. During the process of dismantling it, we found that the floor drain core was too tight. In this case, how do we disassemble it?

Eliminate Drain Issues: Removing a Tight Floor Drain Core

1. First, we prepare a pair of chopsticks to test the depth of the drain pipe by inserting them into it.

2. After determining the depth, we can use a flathead screwdriver or similar tools to gently tap around the gap between the floor drain and the tiles to loosen the floor drain from the cement.

3. Once separated, we can directly remove the floor drain. After taking it out, we can easily take out the floor drain core. Then, we should clean up all the dirt around the drain. If we want to replace it with a new floor drain, we can do so directly. If we just want to loosen the floor drain core a bit, we can adjust it and reinstall it.

Considerations for Purchasing a Floor Drain

1. There are many types of floor drains available on the market. It is advisable to choose a floor drain that is easy to unclog. Some floor drains are round, while others are square. For use in the bathroom, it is recommended to use a square floor drain, as it is more convenient for drainage.

2. The material of the floor drain is very important; avoid choosing those that are prone to rust, as they can appear dirty after use. We can purchase stainless steel floor drains from reputable manufacturers, ensuring good quality.

In summary：the above is the related content and information on how to disassemble a tight floor drain core. I hope it can help you. If you have any other questions, please leave a message in the comment section below, and I will respond promptly to solve your concerns. I believe that through this article, you have gained some understanding of this issue. For more information, please continue to follow our website.