How to Measure Toilet Dimensions for Your Bathroom

Before installing a toilet, it's essential to understand the dimensions to determine how much space to reserve. Below is an introduction to the standard toilet dimensions.

Toilet Dimensions

The standard size of a toilet is typically 650mm x 345mm x 740mm. If the bathroom area is relatively small, you can opt for a compact toilet, which has a length of about 70mm, with the distance from the wall to the front outlet being approximately 40cm for a front outlet and around 30.5cm for a center outlet, while a rear outlet would be about 20cm.

How to Choose a Toilet

1、When purchasing a toilet, you can start by touching the surface of the toilet to check for any unevenness. A good quality toilet will have a smooth glaze that feels refined. In contrast, a lower-quality toilet may have a dull color and show small holes when placed under light.

2、High-end toilets are usually made from materials that are fired at high temperatures, meeting the requirements for fully vitrified products. You can weigh the toilet to gauge its quality; if it feels heavy, it indicates better quality. Medium to low-end toilets are fired at lower temperatures, which can lead to differences in weight and quality. You should also test the flushing efficiency to ensure it has good power.

3、When selecting a toilet, it is advisable to reach into the waste outlet area to check its smoothness. If it feels very smooth, it suggests better quality, whereas a rough texture indicates that some parts might lack glazes, which could lead to leaking issues later on. Pay special attention to the sealing ring, which is usually made of rubber.

In summary：This concludes the information about toilet dimensions. The standard size is usually 650mm x 345mm x 740mm. If your bathroom is small, be sure to choose according to your actual space to determine which type is the most suitable.