Updating Your Tiled Floor: A Guide to Adding Floor Drains

When renovating a bathroom, some friends realize they need to add a floor drain only after the floor tiles have already been laid. So, how can you add a floor drain after the tiles are installed? Let’s take a look!

How to add a floor drain after the tiles are laid

Although it is possible to add a floor drain later, the process is complicated and requires the following steps:

1. Determine the location: Once the position is confirmed, pry up the corresponding tiles in that area.

2. Create an opening and install the floor drain: After installation, fill the surrounding area with waterproof mortar and ensure the floor is leveled.

3. Repair the original waterproofing layer: Choose a piece of tile that matches the original design, cut it to size, and lay it next to the floor drain to make it less noticeable.

When installing the floor drain, ensure to control the surrounding slope for proper drainage.

What are the steps to tile the floor?

1. Before tiling, treat the ground first, ensuring it is smooth and free of dust.

2. Since the bathroom has a high water usage, be sure to apply a layer of waterproof material to the floor, which will prevent leakage.

3. It is best to apply the waterproof coating in three layers. A complete waterproof layer will be created, and you should wait for each layer to dry completely before applying the next one, allowing about six hours between each application.

4. Once the waterproof layer is completely dry, you can apply cement mortar to the back of the tiles and start placing the tiles on the floor, preferably starting from the center and working outward. If the tiles are not the right size, remember to cut them before installation.

5. After tiling, do not walk on the tiles casually to avoid displacing them.

In summary：this is the information about how to add a floor drain after the tiles have been laid. I hope you found this article helpful, and if you would like to learn more, please continue to follow our website for updates。