How to Remove a Broken Faucet: A Step-by-Step Guide

The faucet is familiar to everyone, as it ensures normal water supply in the home and brings tremendous convenience to our lives. However, over time, it is inevitable that problems may arise, leading to its improper functioning. So, how do you remove a broken faucet? Let’s take a look at the relevant knowledge.

How to Remove a Broken Faucet

1. Preliminary Preparations

First, prepare a new faucet, a flathead or Phillips screwdriver, an Allen wrench, needle-nose pliers, a utility knife, and other necessary tools.

2. Remove the Faucet Button

Before replacing the faucet, be sure to turn off the main water supply to prevent water from spraying everywhere during the replacement. Then, locate the faucet button (or plastic cap) and gently pry it off using a utility knife. At this point, you should see the screw inside the faucet.

3. Loosen the Screw

Choose the appropriate screwdriver based on the shape of the screw, or use the Allen wrench as needed. Use the screwdriver to unscrew the screws inside the faucet hole, which will allow you to take off the faucet handle.

4. Remove the Cartridge

After removing the handle, you will see the internal cartridge. Some faucet cartridges may have an outer shell cover, which you should remove. Next, you’ll find a retaining clip that holds the cartridge in place; this clip has four prongs. Use the needle-nose pliers to grip the sides of the prongs and turn clockwise to remove the clip. Once the clip is removed, you can take out the cartridge.

5. Install the New Faucet

Now, installing the new faucet is quite simple. Just reverse the previous steps to install it. Reattach all components one by one. After the new faucet is installed, turn on the water supply and check for leaks. If everything is fine, tighten the handle and replace the plastic cap—your faucet installation is complete.

Conclusion: The knowledge about how to remove a broken faucet has been provided here, and I hope it will be helpful to you. As long as you follow the steps outlined above and install a new faucet, it is quite straightforward. Why not give it a try? For more related information, please continue to follow the Hawkrown.com information platform.