How to Install a Toilet: A Comprehensive Step-by-Step Process

To ensure that the toilet can be used properly, it is generally necessary to follow the correct steps during installation. Let's learn about the installation steps together.

The steps for toilet installation include：

1、Check the sewage pipe to avoid blockages caused by mud, debris, or waste paper inside the pipeline.

2、Turn the toilet upside down, align the drainage pipe with the center, and draw a cross centerline that extends to the surrounding area and the bottom of the toilet.

3、Secure the toilet according to the cross line of the sewage outlet, then add a sealing ring to the toilet drain or apply silicone sealant or cement mortar around it.

4、Connect the hose and install the angle valve, then connect the related accessories of the water pipe to the hose.

Attention to details when choosing and installing a toilet：

1、Before installation, check the ground to see if the floor surrounding the installation location is level; if not, the floor must be leveled first. Additionally, the outlet should be slightly trimmed, and whenever possible, it should be at least 2 to 5 centimeters higher than the floor.

2、During toilet installation, check if the toilet has a properly installed trap. Some manufacturers may choose not to glaze the trap area to save costs and may use inferior sealing gaskets that lack good sealing properties and elasticity. This can easily lead to blockages and leaks in the toilet. Therefore, when purchasing a toilet, it's essential to touch the glazed surface of the trap area to ensure it is smooth.

3、When choosing a toilet, do not just go for an attractive appearance; it is important to pay attention to the quality. Generally, you should check if the glaze is smooth and even, if there are any missing glazes or pinholes, and whether the branding is clear, along with any missing installation accessories. Also, inspect the toilet for any signs of deformation; if present, the toilet should be replaced with a higher-quality product.

summary：The above is a detailed introduction to the installation steps for a toilet and the details to pay attention to when selecting and installing a toilet. I hope this can provide some help. Once the toilet installation is completed, you can press the flush button for testing to see if there are any leaks; if there aren't, it indicates that the installation is successful.