How to Fix a Toilet Plunger That Won't Seal Properly

When a toilet becomes clogged, a plunger is often used to clear it, and this tool is a necessity in every household. But what should you do if the plunger can't create a proper seal due to gaps? Let's take a look at some important considerations for using a toilet plunger.

What to Do If the Plunger Can't Create a Seal Due to Gaps

If the plunger is unable to create a proper seal, it likely means that the plunger is damaged. In this case, it is advisable to replace it with a new one to ensure effective use. A faulty plunger will have reduced suction power and will not be able to clear the toilet blockage effectively.

Important Tips for Using a Toilet Plunger

1、When using a plunger, take your time and don’t rush. Start by adding some water to the toilet bowl, then place the plunger into the bowl. Gradually push and pull the plunger a few times, which can help dislodge the blockage. If there isn’t enough water in the toilet, the plunger won’t create the necessary vacuum, making it difficult to pull it out. The correct way to use the plunger is to push it down and then pull it up, repeating this several times until the toilet is cleared.

2、Ensure that the rubber side of the plunger is facing down and covers the drain hole completely. It must fit snugly against the drain; any gaps will prevent successful unclogging of the blockage.

3、Before using the plunger, check to ensure it is intact. If there are any cracks on its surface or if it does not seal properly, it will be difficult to use and may even worsen the clog. In such cases, you should replace it with a new one before attempting to unclog the toilet.

In summary：this article has outlined what to do if your plunger can't create a seal due to gaps and important considerations for using a toilet plunger. If you want to learn more, please continue to follow our website for exciting content in the future.