DIY Faucet Installation: Connecting the Water Supply Line

Washing machines are one of the essential home appliances in every household. When using a washing machine, a faucet must be installed so that water can flow into the washer. Here we will discuss the steps for installing the faucet’s water inlet pipe, as well as how to layout the water piping during home renovation. Let’s take a look!

Steps for Installing the Faucet Water Inlet Pipe

First, check whether the installation accessories for the faucet are complete. Then press the slider of the inlet pipe, detach the connector from the inlet pipe, and loosen the four screws at the connection until the faucet can fit into the inlet pipe. Next, use a screwdriver to secure the screws and tighten the nuts at the connection. After confirming that there are no leaks, connect the inlet pipe to the inlet pipe connector.

How to Layout Water Piping for Home Renovation

1. When laying out water piping during home renovation, try to run the pipes along the ceiling rather than the floor. This avoids the pressure of the tiles and the weight of people walking over them, which increases the risk of the pipes cracking. Running pipes along the ceiling can prevent this issue and make repairs easier, though the labor cost may be higher.

2. When installing hot and cold water pipes, the cold water pipe should be on the right side and the hot water pipe on the left, following the principle of “hot above, cold below.” The supply pipes are generally made of PPR thermofusion pipes, which are easy to work with and have good sealing properties, but improper force during installation can easily lead to pipe blockage.

3. After installing the pipes, secure them with pipe clamps before sealing the grooves. The distance between clamps for the cold water pipe should not exceed sixty centimeters, and for the hot water pipe, it should not exceed twenty-five centimeters. Additionally, after the pipes are installed, pressure testing must be conducted to check for leaks.

In summary, we have introduced the steps for installing the faucet’s water inlet pipe. I hope this information can help those in need. Proper installation of water pipes is crucial during home renovation, as improper installation can lead to leaks or even bursts, resulting in irreparable damage.