The Working Principle of the Pressurized Faucet

The faucet can be said to be an indispensable material in the home. Whether in the bathroom or the kitchen, the faucet plays a very important role. To meet people's needs, the pressurized faucet is one of them. Below, the editor will introduce to you what the working principle of the pressurized faucet is.

The Working Principle of the Pressurized Faucet

1.The working principle of the pressurized faucet is to squeeze air into the showerhead through a certain configuration. Through the external pressure of the air, the water flow is increased under the condition of the same water volume. The pressurized showerhead adopts the principle of variable diameter current-carrying pressurization. When the pressure of the tap water is high, the water it sprays out will not sting the skin. With a pore diameter of 0.2 and more than 100 holes, even with a large pressure, it will be dispersed when passing through the sprinkler plate and naturally become very gentle. The showerhead is pressurized before the cold and hot water enters the mixing valve, so that the water temperature, water pressure, and water output of the shower reach the maximum degree of stability, and there will be no phenomenon of sudden cold and heat.

2.When the water flow enters the base of the showerhead, it will be pushed into a three-wing accelerator to make the water flow form a rotating effect to increase the speed and impact force of the water flow. Then it directly enters a restricted water channel, where the mixture of air and water can increase the oxygen content by 10 times. In this way, not only the purpose of saving water and energy is achieved, but also a satisfactory bathing experience is brought.

3.The pressurized showerhead can intelligently limit the water flow. It automatically adjusts the water inlet area according to the size of the water pressure. When the water pressure is low, the water inlet area is opened wide to balance the water volume, which can both increase the pressure and save water. It automatically changes the water inlet surface area according to the size of the water pressure. When the water pressure is low, the water inlet area is opened wide. In this way, the water output reaches a balance, and the purpose of increasing the pressure is achieved. However, it should be noted that the pressurized showerhead only increases the water pressure of the showerhead's water output by changing the water inlet area, and it does not really solve the problem of insufficient water pressure in the home.

Conclusion: The relevant content about what the working principle of the pressurized faucet is has been introduced here. Before using it, you must first understand the principle clearly, so as to avoid some unnecessary mistakes during the use process.