DIY Solutions for Removing a Tight Faucet: No More Stuck Fixtures

Faucets are one of the most common hardware products in our daily lives, controlling the use of tap water. However, over time, they can easily develop leaks, and many people choose to replace their faucets. At this point, if the faucet is too tight to unscrew, it can be quite frustrating. Here, I will introduce some solutions for dealing with a faucet that is too tight to remove.

What to Do If the Faucet Is Too Tight to Unscrew

For older faucets, the main reason they cannot be unscrewed is the rusting of the screw rod. It is important not to forcefully twist it, as this can easily cause the screw to break, leading to water leakage. A solution is to use a wrench to slightly loosen the cap on the faucet and then repeatedly turn the faucet on and off. Once water starts flowing out from the cap area, you should be able to unscrew the faucet easily.

Precautions for Installing a Faucet

1. If you need to replace a single-hole faucet for a basin, it is necessary to purchase a dedicated angle valve product to secure the hot and cold water pipes from the wall outlet. If there is a distance discrepancy between the angle valve and the water supply pipes, you should purchase an extension pipe. If the pipe is too long, it may need to be cut shorter, and if the angle is not quite right, it can be bent slightly to adjust to the desired position.

2. When replacing a wall-mounted faucet, you should select an appropriate height for the concealed water pipe, ensuring that the hot and cold water pipes are at least 20 centimeters apart. If you are replacing a hidden faucet, the faucet cartridge needs to be embedded in the wall, but attention must be paid to the wall thickness. During the embedding process, the plastic film on the cartridge should not be removed to avoid damage. Also, pay attention to the orientation of the cartridge to avoid errors.

3. Typically, the left pipe is connected to hot water, and the right pipe is connected to cold water, with a distance of 100mm to 200mm between the two pipes. After securing the water inlet connection, you can remove the faucet. Once the overall wall work is completed, you can re-install the faucet.

Conclusion: The information provided above addresses what to do if a faucet is too tight to unscrew. I hope this helps you. I believe that after reading this, you will have a better understanding of the precautions for installing a faucet. If you have further needs in the future, you can refer to the above information.