Home / Blog Center / Chargers / How to Install a Washing Machine Without a Drain
26/02/2025 | Hawkrown
When there is no floor drain available, how can you install a washing machine? Let's take a look together.
How to Install a Washing Machine Without a Drain
First, use an electric drill to create a hole in the ground, drilling out a hole about 2 centimeters wide. Then, place the washing machine's drainage pipe inside it, allowing for normal drainage when in use. Alternatively, you can place a basin on the ground to collect the water, which can then be emptied manually.
Best Locations for Installing a Washing Machine
1. The washing machine should be installed in a location that facilitates drainage to avoid issues with water not being properly drained.
2. It is suggested to install it in the bathroom, as most bathrooms are equipped with plumbing that makes water supply and drainage convenient.
3. Avoid placing the washing machine in direct sunlight, as this can lead to cracks and significantly affect its lifespan.
4. Also, do not place it in an area where it can get wet from rain; a drier room is recommended.
Length of the Washing Machine Drainage Pipe
1. Generally, the drainage pipe for washing machines should be within 1.3 meters in length. As long as it can reach the drainage hole and connect properly, it should function correctly.
2. It's essential to ensure proper sealing when installing the drainage pipe; otherwise, leaks may occur.
3. The size of the drainage pipe should be determined based on the actual situation. If it's too long, it may affect normal operation.
4. The plastic screw on the drainage pipe should not be too loose, as this could lead to it falling off, resulting in water accumulation in the room during use.
In summary:the above information includes how to install a washing machine without a drain, the best locations for installation, and the recommended length for the drainage pipe. I hope this can help those in need. If you would like to learn more about installation knowledge in the future, please continue to follow our website or leave a message below.