The Ultimate Guide to Installing a Kitchen Faucet Like a Pro

In order to achieve smooth water usage at home, having a faucet is essential. The faucet controls the water flow, functioning as a valve that can be turned or pressed to open and close the water supply. Therefore, in places like the

kitchen and bathroom where water usage is high, installing faucets is necessary, and there may be more than one. So, what are the installation methods for kitchen faucets? Let’s take a look together.

Installation Methods for Kitchen Faucets

To install a kitchen faucet, first connect the two water supply pipes to the inlet ports of the hot and cold water faucet. Typically, the hot water inlet is on the left side. Next, insert the faucet’s mounting stem through the water supply pipes, and then install the faucet onto the sink. One of the sink openings should accommodate the water supply pipes. Finally, secure the horseshoe plate and tighten the screws and nuts.

How to Choose a Kitchen Faucet

1. Consider the Rotation Angle and Height

The height of the kitchen faucet should not be too low, as it may hinder washing vegetables and dishes. It’s best to have a faucet with the capability to rotate 360 degrees for convenience during use.

2. Consider the Material

There are several materials available for faucets in the market, including stainless steel, pure copper, zinc alloy, and plastic. For kitchen use, stainless steel, pure copper, and zinc alloy are suitable. Among these, stainless steel is

preferable since it does not require plating, thus preventing the release of harmful substances that could contaminate water and impact human health. Additionally, it is highly resistant to rust, with good hardness and toughness, though it tends to be more expensive.

3. Consider the Length of the Spout

Kitchen sinks generally have two compartments, so it's essential to choose a faucet that can accommodate both sides. This means the spout should not only be long enough but also capable of rotating. Ideally, a pull-out spout would be even better as it allows for cleaning every corner of the sink.

In summary, the above is an introduction to the installation methods for kitchen faucets. I hope the information shared can provide some guidance. For more related knowledge, feel free to follow us at Hawkrown.com for consultation.