How to Remove a Tight Plastic Floor Drain Core: A Step-by-Step Guide

To install a floor drain in the bathroom, if the drainage pipe is clogged, the floor drain can be loosened to unclog it. If the core of the floor drain is too tight when unscrewing, what can be done to disassemble it? If the drainage pipe is clogged, what should be done?

How to Remove a Tight Plastic Floor Drain Core

After removing the cover and filter of the floor drain, try to rotate it counterclockwise, then clockwise, to see if it can be taken out. If the plastic drain core is too tight or cannot be removed, you can wipe the area around the drain core and apply some lubricant or loosening agent to create some slack around the drain core, which will help in unscrewing it.

What to Do When the Drain Pipe is Clogged

1. Clogging often occurs, especially in shower areas where hair and debris can block the drain. Over time, this not only stops drainage but also produces unpleasant odors. You can use caustic soda because it has corrosive properties. Pour it into the drain, and when it reacts with impurities in the water, increase the water amount to flush the drain and clear it.

2. You can also mix baking soda with vinegar. These two substances will react chemically and have a cleansing effect. After a few minutes, pour in hot water to increase the flow rate. A similar principle applies when mixing detergent with vinegar as a way to unclog.

3. Plunger Method: First, take a piece of wood roughly the same size as the drain outlet and insert it into the drainage pipe. Add a certain amount of water to the basin, then repeatedly push and pull the wood to create suction and pressure, which can help move the dirt within the pipe.

4. To fundamentally address the issue of drain blockage, avoid putting trash, especially hair, into the floor drain. If you have hair loss, even if a protective cover is applied, the hair will not flow through the pipe easily and may lead to blockages.

5. For particularly difficult clogs, it is best to call a professional for assistance. Attempting to resolve it on your own may damage the pipes, making the repair process more complicated.

In summary：this is the information on how to remove a tight plastic floor drain core and what to do if the drain pipe is clogged. I hope this helps, and for more information, you can continue to follow our website.