Home / Blog Center / Chargers / The Copper Core of the Floor Drain Falls into the Bend of the Drain Pipe: What t

The Copper Core of the Floor Drain Falls into the Bend of the Drain Pipe: What t

25/02/2025 | Hawkrown

If the quality of the floor drain is poor, the copper core inside may fall into the sewer pipe. So, what should we do if the floor drain copper core gets stuck in the bend of the sewer pipe? Here's a brief introduction.

What to do if the floor drain copper core falls into the sewer bend

First, we can use a plumbing snake to retrieve it. Insert the spring part of the snake into the floor drain, and rotate the handle until the hook catches the copper core, then rotate the handle to pull it out. Typically, the copper core will fall into the water seal bend of the sewer. In such cases, we can hire professionals to dismantle the trap to retrieve the fallen copper core.

How to prevent floor drain clogging

1. In daily maintenance, it is important to regularly clean the bathroom floor. For example, after washing your hair, make sure to clean up fallen hair to avoid it being washed down the drain and causing a clog. We should also remove the drain cover and rinse it to prevent dirt from blocking the drain, which can affect drainage.

2. Most households have steel wool or pantyhose that can be repurposed. We can take a portion of the steel wool, loosen it a bit, and place it in the floor drain; alternatively, we can use a thin pantyhose to cover the drain cover. This will effectively prevent debris from entering the sewer pipe. Special mesh mats designed for this purpose can also be purchased and placed over the drain to keep debris out.

3. To avoid floor drain clogging, regular cleaning and maintenance of the drain pipes are necessary. For instance, you can pour baking soda followed by vinegar into the drain; these two substances will react and help clean the pipes. Alternatively, you can use a commercial drain cleaner as per the instructions and then flush it with water to help dissolve the dirt inside the pipes.

In summary:this article provides some tips on what to do if the floor drain copper core falls into the sewer bend. I hope this information is helpful for you. If you want to learn more about related topics, continue to follow our website.

Contact Us

Submission Successful

ok