Easy Solutions for Retrieving a Small Drain Cover from Your Bathroom Drain

We often encounter floor drains in our daily lives, but we also face various issues during their use. So, what should we do if the small round cover of a floor drain falls into the bathroom drain?

How to Fix the Problem of a Missing Drain Cover in Your Bathroom

1. For common stainless steel floor drains that are not made of 304 or 201 materials, you can use a strong magnet to retrieve it. First, test the suction power of the magnet on the floor drain. Then, tie the magnet to the end of a sewer snake or similar tool and insert it into the drain, feeling around until it catches the fallen cover. Finally, pull it out.

2. If the stainless steel material is of good quality and has low magnetic attraction, you’ll have to consider the structure of the drain. The structure beneath the drain in most buildings usually consists of a U-bend with a diameter of 50mm. If the cover falls into this U-bend, it will get stuck. Remove the cap from the U-bend to release water, then use two needle-nose pliers to grasp the round cover and twist it to deform it into a more cylindrical shape, making it easier to retrieve.

3. If the above methods do not work, the only option left is to disconnect part of the U-bend to retrieve the cover while replacing the U-bend.

Next, let's discuss some points to consider when installing a floor drain

1. Ensure that the floor drain is installed level without leaks, and it should be set at the lowest point of the floor, with the other floor drains approximately 5mm lower than the set surface.

2. The water seal depth of the floor drain should not be less than 50mm, and the installation location must be appropriate, ensuring that the exterior is treated for corrosion resistance.

3. The diameter of the drain outlet should be between 6 to 8mm to prevent debris such as hair and sand from entering.

4. After construction is completed, seal the gaps around the floor drain with silicone sealant to prevent odors from escaping.

In summary：the above are solutions for when a small round cover falls into the bathroom drain. From this article, we can see that caution is necessary during the installation of the floor drain. It is essential to ensure proper placement and sealing to guarantee its proper functioning and prevent odors, thus avoiding a lot of trouble. I hope this information helps everyone.