Removing a Water Faucet Hose: Essential Steps You Should Know

Most households typically install 4 to 5 faucets for convenience, but if there are issues with the faucets, it can affect usage and require replacement. So, how do you detach the faucet hose, and how should you maintain the faucet? Let's take a look.

How to remove the faucet hose

1. Before removing the faucet hose, make sure to turn off the main water valve.

2. Locate the faucet hose head under the kitchen sink and unscrew it.

3. Unscrew the fixing ring that holds the faucet in place and remove the hot and cold faucets.

4. Pull the faucet upwards to detach the faucet hose.

How to maintain the faucet

1. Before using the faucet, it’s important to know how to protect it. When operating the faucet, avoid using excessive force; simply turn it clockwise or counterclockwise. Using too much force can damage the internal sealing valve, leading to leaks over time.

2. For hose faucets used in the bathroom, regular maintenance is crucial. Try not to let the hose coil around the faucet, as this can lead to damage. Additionally, ensure that there are no hard-to-reach angles at the hose's connection points to prevent kinks or damage. Installation and repairs should be handled by professionals.

3. Regular cleaning of the faucet is also important. Rinse the surface of the faucet with clean water, and once the stains are washed away, use a soft cloth to wipe it down, preventing watermarks from forming and becoming dirt later on. Be careful not to apply too much pressure while wiping to avoid damaging the faucet.

This concludes our introduction on how to remove the faucet hose and maintain the faucet. Do you understand now? If the faucet hose has any problems, it needs to be replaced promptly, and the entire process should be carried out by professionals to avoid causing further damage.