How to Restart Your Smart Toilet After a Power Outage

Smart toilets are currently very popular, but they require an electrical connection. Today, I would like to share how to restart a smart toilet after a power outage. Let’s take a look together.

How to Restart a Smart Toilet After Power Loss

1、Long press the large button on the upper left corner of the smart toilet for automatic restart.

2、There is a reset button on the left side of the toilet; the position of this button may vary by brand, but pressing it will turn the toilet back on.

3、You can forcibly restart the smart toilet by cutting off its power supply, but this can cause significant damage to the toilet, so it should only be done in case of a system crash.

How to Use a Smart Toilet

1、Press the "Wash" or "Wash Butt" button on the remote control; the nozzle will spray water in a fixed position for one minute, then stop automatically.

2、After the wash function is activated, pressing "Wash" or the wash button on the remote again will cause the nozzle to move back and forth for enhanced washing effectiveness. When the nozzle is pressed again, it will not move back and forth but will continue to work in its current position.

3、Press the "Massage" or "Massage" button on the remote; the water pressure will rhythmically vary to achieve a massage effect. To stop, simply press this button again, and it will return to the original massage state.

4、After one minute of washing, press the "Warm Air Dry" button on the toilet. The toilet will use warm air to dry, automatically stopping after three minutes. When the drying function is activated, the warm air outlet will move back and forth rhythmically to enhance the drying effect.

5、During the washing function, when not using the moving back-and-forth washing function, press the "Front" or "Back" buttons on the remote to adjust the position of the washing nozzle.

6、When the cleaning function is activated, press the "Stop" or "Stop" button on the remote control to stop the ongoing functions of the toilet.

7、When the mobile function is active, press the "Massage" button on the remote to simultaneously use the mobile flush and massage functions.

In conclusion：this is a summary of how to restart a smart toilet after a power outage and how to use it. I believe after reading the above information, you have gained a better understanding. For more related information, please continue to follow the Hawkrown website, and I will provide further assistance.