How to Effectively Install a Drain Odor Control Device in Your Home

The floor drain often accumulates dirt, and over time this can lead to the growth of bacteria and unpleasant odors. Therefore, it's essential to install an anti-odor floor drain. Let’s take a look at how to install this anti-odor device step by step.

Installing a Drain Odor Prevention Tool: What You Need to Know

1. Prepare the Floor Drain

Before installation, you need to purchase an anti-odor floor drain and ensure it is the right size. Additionally, check that the product is intact and all accessories are complete to ensure a smooth installation process. Before installing, remove the sealing core from inside to prevent it from falling into debris during installation, which could affect its performance.

2. Arrange the Drain Pipe

The floor drain needs to be connected to the drain pipe to ensure that water from the floor is effectively drained away. When arranging the drain pipe, pay attention to the distance from the ground; it should not be too close to the surface. If the pipe is too long, it needs to be cut shorter. If the drain pipe is too high from the ground, use mortar to fill the gap so that the floor drain can fit into the pipe.

3. Inject Cement Mortar

During installation, first block the drain pipe with a cloth to prevent debris from falling in and causing a blockage. Then, use kraft paper to create a cylinder that matches the width of the drain pipe and place it at the mouth of the drain pipe, making sure it is a little higher than the ground level. Fill the cylinder with mortar, ensuring that the surface of the floor drain is slightly lower than the ground.

4. Install the Anti-Odor Floor Drain

Once the cement mortar has hardened, place the floor drain into the pipe. Be cautious not to cover the sealing core with the mortar, as this would make it impossible to remove and would affect the normal drainage of the floor drain.

5. Address the Gaps

After the installation of the floor drain, it's important to address the gaps between the drain and the floor. Use cement to smooth out these gaps, then reinstall the sealing core and finally place the grate on top. The installation is now complete. When using the floor drain, regularly clean out any accumulated dirt underneath, and also remove and clean the sealing core to prevent blockages that could impair drainage efficiency.

Summary:The above content covers how to install an anti-odor floor drain, and I believe everyone understands it now! It is essential to install an anti-odor floor drain in the bathroom to prevent unpleasant odors from arising during drainage, which can affect daily life.