How to Fix a Toilet That Fills and Leaks at the Same Time

We use toilets every day, but over time, they may develop various issues. So, how do you fix a toilet that is filling with water while also leaking?

How to fix a toilet that is filling with water while leaking？

First, check the water tank's inlet. Open the tank and inspect whether the inlet seal is damaged. If it is broken, you need to replace it. If it’s not damaged, you can adjust the orientation of the rubber gasket. If the float valve is the problem, turn off the valve, find the pin of the float, remove it, and then repair the float valve.

What are the solutions for a clogged toilet？

If you find that the toilet is clogged, it must be addressed promptly. Here are some effective methods you can use:

1、Use a mop: Place the mop over the toilet’s drain hole and continuously pour water into it. When the water level rises above the mop, push it hard against the drain and then quickly pull it out. Repeat this process several times. If the clog is not severe, it should be cleared quickly.

2、Use plastic wrap: First, drain the water from the toilet. Then, seal the toilet's holes tightly with plastic wrap; the tighter the seal, the better the effect. Once sealed, flush the toilet. The change in air pressure will cause the wrap to bulge, helping to unclog the toilet.

3、Use a toilet plunger: Add a small amount of water into the toilet bowl, then insert the plunger into the toilet. Position it at a slight angle facing the drain and apply pressure. When the toilet lid becomes heavy, the pressure will increase. Quickly pull the plunger out to clear the clog.

In summary：The above are methods to repair a toilet that is filling with water while leaking. As discussed in this article, if you find any issues with your toilet, it’s essential to resolve them immediately. Otherwise, prolonged neglect can affect your daily life and may cause further damage to the toilet, which is not worth the cost. I hope this helps everyone.