Replacing Your Floor Drain: A Simple Process for Homeowners

It is widely known that floor drains are one of the essential hardware components in bathroom renovations. So the question arises: do you know how to replace an old floor drain with a new one? How can we maintain the floor drain?

How to Replace an Old Floor Drain with a New One

First, use a hammer to loosen the old floor drain and remove any debris around it. Next, apply the prepped concrete to the original installation position. Then, properly adjust and install the new floor drain. Finally, apply the prepared white cement to the gaps, wait for 10 minutes, and wipe away the excess cement with a cloth. This completes the floor drain replacement.

How to Maintain a Floor Drain

1. During regular cleaning of the floor drain, a brush can be used effectively to remove dirt. However, it is best to avoid using plastic cleaning tools as they can easily cause wastewater to splash everywhere, disrupting normal use. It is important to remember that the wastewater inside the drain contains many bacteria that can be harmful to health.

2. If the floor drain becomes clogged, pure soda can be used to clear it. Prepare a basin and pour in 50 degrees Celsius hot water, adding a certain amount of pure soda in proportion until it fully dissolves. Finally, pour the prepared hot soda water into the floor drain; this will effectively dislodge the clogs and ensure future usability.

3. After the drainage has been unclogged, soak the cover of the floor drain in the hot soda solution for some time, then rinse it with tap water and let it dry. Once all the grime is cleaned, use a cloth dipped in soda water to wipe the floor drain and the contact area, remove any trapped hair, and finally rinse it once more with tap water.

In summary：this is all about how to replace an old floor drain with a new one and how to maintain it. I hope everyone has understood the information provided. If you are interested in learning more detailed knowledge, remember to keep an eye on our website!