Dealing with Water Seepage Around the Toilet: Tips for Homeowners

We use toilets every day, but over time, various problems may arise. When this happens, it is necessary to take appropriate measures to address them. So, how do we deal with water seepage from the edge of the toilet base?

How to deal with water seepage from the edge of the toilet base？

First, remove the silicone sealant around the base, then lift the toilet to check if the sealing ring of the drain outlet is damaged. If it is damaged, replace it with a new one. After that, apply silicone sealant at the junction between the toilet and the floor. Next, align the toilet’s drain outlet with the sewage pipe for installation. Finally, use silicone sealant to completely seal the base of the toilet.

What aspects should be considered when installing the toilet？

1、Many homeowners choose universal toilets that have two drain outlets. Before setting it up, we must ensure the pit distance and clarify the drain outlet of the toilet. One of the drain outlets should be blocked and sealed properly with sealing glue. If the other drain outlet is not sealed correctly, the toilet may easily experience odor issues and leaking.

2、Before installing the toilet, it is essential to check the bathroom floor for any unevenness to prevent issues with hollow areas. Otherwise, the toilet will not be stable during installation. If the position of the toilet is not appropriate during operation, a repositioning tool can be used to adjust it, but the position should not exceed 10 centimeters.

3、In a bathroom, the sewage pipe is usually elevated above the floor by a certain distance. When installing the toilet, a little bit of the sewage pipe may need to be cut, and it is important to ensure that the sewage outlet is 2 to 5 millimeters above the ground. Additionally, to ensure the safety of the toilet, make sure the sewage pipe drains smoothly.

In summary：the above is how to handle water seepage from the toilet base. From the article, we can see that it is essential to follow the proper steps when dealing with this issue to ensure it is resolved perfectly without wasting too much material and time, thereby reducing the likelihood of future problems and allowing us to use it with peace of mind. Hope this helps everyone.