DIY Guide: How to Attach Your Washing Machine to a Faucet

Nowadays, almost every household uses a washing machine for laundry, which is not only convenient but also quick. To use a washing machine, you first need to connect it to the faucet. Let's learn how to connect the washing machine to the faucet together.

How to connect the washing machine to the faucet:

1. Before connecting the faucet, you should first take out and carefully check all the installation accessories to see if there are any damages or missing parts. Additionally, prepare a roll of teflon tape, which is generally wrapped around the faucet and the outlet of the water pipe to prevent water leakage when the faucet is turned on.

2. Washing machines usually come with a specific inlet hose designed to connect to the faucet. First, locate the inlet hose with the fittings, and install it onto the dedicated washing machine faucet.

3. Next, press down the slider to disconnect the inlet hose from the fitting.

4. Then, place the inlet hose's fitting onto the connection of the dedicated washing machine faucet, and tighten the screws on the fitting to ensure it is securely installed and will not fall off.

5. After that, attach the inlet hose to the fitting of the water inlet pipe and tighten the fitting to avoid any leaks.

6. Next, connect the other end of the inlet hose to the washing machine's water inlet, and also tighten the fitting to prevent leakage.

7. Once everything is installed, make sure to turn on the faucet. This way, when the washing machine is turned on, it will automatically begin to fill with water.

8. The actual installation length of the inlet hose can be adjusted based on the distance between the washing machine's placement and the floor drain. If the inlet hose is not long enough, you can purchase an extension hose to extend it.

That's a detailed introduction on how to connect the washing machine to the faucet. I hope it can help those in need. When connecting the washing machine to the faucet, be careful and follow the correct steps to avoid any leakage issues.