Step-by-Step Guide: Sealing Extra Floor Drains in Your Home

The floor drain is commonly known for its drainage function, so it must be installed in the bathroom. Below, I will introduce how to block excess floor drains.

How to Block Excess Floor Drains

1. You can use a plastic bag filled with 80% sand, press it over the floor drain, and allow it to slowly conform to the drain, effectively blocking it.

2. Find an unusable brush, soak it in disinfectant for a while, and then use it to block the floor drain, which can create a sealing effect.

3. You can also use stones or a wooden plug to block the floor drain, and then seal it with cement. Once it hardens, it will be secure.

Details to Note When Installing Floor Drains

1. When installing the floor drain, it is generally done simultaneously with the floor tiles. If you are installing the drain in the kitchen or bathroom, make sure to first check if the waterproofing of the floor meets the standards. Only if the waterproofing is satisfactory should you proceed with installing the drain and laying the tiles.

2. For standard floor drains, the installation process is relatively simple. Just prepare a drain of the appropriate size, apply mortar on the back of the drain, ensure that it is properly connected to the drainage system, and then cover it with the lid.

3. To prevent water from accumulating and being unable to drain quickly, make sure that the floor drain is installed at a proper slope relative to the floor. If the drain is level with the floor, it will be difficult for water to drain, leading to water pooling. Ensure proper installation of the drain and adjust the slope according to the actual conditions. The slope should not be too steep, as that may negatively affect the flooring decoration.

4. Before installing the floor drain, cover the drainage opening with a cloth and check the pipe for any debris, such as stones or cement. If present, clean it out to prevent clogging in the drainage system.

In summary：this concludes the information on how to block excess floor drains. By following the methods mentioned above, you can effectively block the drain. During the process, it is also necessary to consider the actual conditions to determine which method is most suitable.