Comprehensive Guide to Repairing Toilet Base Water Leaks

Toilets are essential sanitary fixtures in every household, and dealing with malfunctions can be quite troublesome. What should you do if there is water seepage around the toilet base?

How to Handle Water Seepage Around the Toilet Base

First, use a small knife to remove the original glue around the drain hole. Clean the drainage hole under the toilet thoroughly and apply a thick layer of glue around the edge of the drain. Use a caulk to evenly coat the inner side of the toilet base. Place the toilet back on the markings and press down firmly, then push down at the bottom of the toilet. Wipe away any excess glue with a cloth, and it should be good after 24 hours.

What to Consider When Installing a Toilet

1、Determine the toilet's position. Ensure an appropriate distance from the wall that does not interfere with the door's opening and closing. Consider the relative positions of the washing machine, bathtub, sink, etc., as well as the convenience of opening the bathroom door.

2、The material of the toilet itself should be good quality. Substandard toilets have shorter lifespans and are troublesome to replace. Pay attention to quality when purchasing.

3、The waterproofing of the bathroom is also very important. The gap between the toilet hole must be filled with white cement and caulk for better waterproofing.

Toilet Installation and Inspection

1、Open the angle valve and check for leaks at the connection points. Make sure that the valve inside the tank opens and closes automatically and flexibly.

2、After filling the tank with water, check the distance between the water level and the overflow tube. Grasp both sides of the toilet and gently shake it to see if it is stable.

3、Place a group of toilet paper inside the toilet, then open the flush hole and observe the flushing. Check for leaks at all connection points and flush at least three times. If the drainage is smooth and no leaks are observed, it is considered qualified.

4、Before choosing a toilet, confirm the size of the drainage outlet. The standard distance from the outlet to the wall is 2 centimeters.

5、You can choose a toilet style based on size. Generally, water-saving models (3-6L) are available depending on the model and origin.

6、Before installing the toilet, ensure that all accessories and the instruction manual are complete, and carefully read the manual to understand the items involved, preventing any substandard work.

In summary：this article discusses how to handle water seepage around the toilet base. I hope it is helpful to everyone. For more content, please continue to follow Hawkrown for further updates.