Avoid Tile Damage: Replace Your Floor Drain Like a Pro

The floor drain is a common item in households, and there are many things to pay attention to when installing or replacing it. So, how can you replace a floor drain without damaging the tiles? What should you pay attention to when replacing a floor drain? Let's take a look.

How to Replace a Floor Drain Without Damaging Tiles

1. Before replacing the floor drain, you need to confirm the specifications of the drain cover, model, and size, ensuring that they match the old floor drain. These can be determined based on the old floor drain.

2. Once the size specifications are confirmed, use a screwdriver to pry open the connection between the old floor drain cover and the tiles. Be gentle during this process, slowly separating them to remove the old floor drain.

3. Next, clean the area around the floor drain, and then begin installing the new floor drain. When installing, first remove the anti-odor core to prevent debris from falling into the drain core.

4. Align the floor drain cover with the original installation position, ensuring that it sits slightly lower than the tiles. Then, apply white cement around it. Once the cement has dried, you can install the anti-odor core.

What to Pay Attention to When Replacing a Floor Drain

1. Before replacing the floor drain, be sure to first remove the drain core to prevent debris from entering during installation, which could affect future use. Additionally, pay attention to the installation position of the floor drain—it must be lower than the floor surface so that water can drain properly. However, it should not be too much lower, as this would impact the aesthetics. For bathrooms where the drain pipe is too far from the ground, you can use cement mortar for filling, ensuring the effectiveness of the floor drain.

2. During the installation of the floor drain, consider future maintenance. When filling with cement mortar, do not place the floor drain directly; you can use a tube to align with the drain pipe for the mortar filling. After the cement mortar has set, you can place the floor drain in position, which will help create a tight bond.

Article Summary:The above content outlines how to replace a floor drain without damaging tiles and what to pay attention to during the replacement. I hope this information is helpful. For more relevant content, please continue to follow our website.