Dealing with Sewer Smells: Solutions for Toilets with Dry Water Seals

If the toilet has a problem with the water seal not holding, leading to odors coming back, the first step is to identify the cause. Below, I will explain how to address the issue of a toilet's water seal not holding and the resulting odors.

What to Do If the Toilet Water Seal Is Not Keeping Water and Smelling Bad

1、If the toilet is newly purchased, it may have a quality issue. In this case, you can request a replacement from the retailer. When choosing a toilet, pay attention to its quality.

2、If the toilet has been used for some time and stops retaining water, it could be due to a deformed sealing ring. To resolve this, remove the old sealing glue at the bottom, replace it with a new sealing ring, and apply silicone sealant.

Installation Considerations for a Toilet

1、Before installing the toilet, it’s important to choose a professional installer to prevent safety hazards. Additionally, measure the toilet spacing and distances accurately to select a suitable toilet model, making the installation easier.

2、If there is an issue with the toilet being tilted during installation, do not continue with the installation. The floor must be leveled first. After leveling, check the surrounding area of the water pipes for debris and clean it thoroughly before installing the toilet. This helps effectively prevent drainage blockages.

3、Additionally, during installation, ensure that the drain outlet is level. Apply silicone sealant around the base and surrounding areas of the toilet. This not only prevents moisture from entering the toilet but also helps avoid leakage.

4、After the installation, conduct a test of the toilet by pressing the flush button to check if it flushes properly. Verify that the water inlet valve is functioning correctly and check the sealing effect. If there are no issues, the toilet can be used normally.

In summary：this article provided information on what to do if the toilet water seal is not retaining water and smelling bad. It’s essential to identify the cause first, which makes it easier to determine the solution.