Washing Machine Installation: Connecting the Faucet with the Right Screw Interfa

To use the washing machine properly, you need to connect the water inlet pipe of the washing machine to the faucet and tighten the screws at the connection point to avoid leaks. Here's how to install the screw connection between the washing machine and the faucet.

Essential Tips for Installing the Screw Connection of Your Washing Machine's Water Supply

1. First, to install the screw connection at the interface between the washing machine and the faucet, you should detach the inlet pipe's connector. When detaching, hold down the lower end of the locking rod of the inlet pipe and press down the slider to remove the inlet pipe's connector.

2. Next, you should install the connector of the inlet pipe. To do this, first remove the tag from the connector, then adjust the nut on the connector so that about three threads of the nut are exposed. After that, loosen the four screws on the inlet pipe's connector, and fit the connector onto the faucet's interface. If you're unable to fit the inlet pipe's connector onto the faucet, remove the bushing and then tighten the four screws, securing the nut until there is no leakage.

3. Next, connect the inlet pipe. Press down the slider with one hand while using the other hand to insert the inlet pipe into the connector. Then use the locking rod to secure the inlet pipe connector and release the slider. When you hear a "click" sound at the connection point, it means the connection is secure.

4. Then, connect the washing machine. Start by placing the nut on the inlet pipe onto the washing machine's water inlet valve connection, then tighten the nut on the inlet pipe, ensuring that it is securely fastened.

5. Finally, carefully check if the installation of the inlet pipe is correct. Turn on the faucet to allow the washing machine to fill with water and check each connection point of the inlet pipe for any leaks or loosening. If there are no issues, the installation can be considered successful.

This is a detailed guide on how to install the screw connection between the washing machine and the faucet. I hope this helps everyone. When connecting the washing machine's water inlet pipe to the faucet, make sure to follow the correct operating steps and tighten the screw connections to avoid any issues.