DIY Solutions for a Broken Plastic Faucet in Your Water Pipe

As we all know, plumbing installation is an important step in home renovation. It is part of the concealed works, so special care is needed during construction; otherwise, repairs can be troublesome later. Some people prefer to choose plastic faucets because they are affordable, but they can easily break after prolonged use. What should you do if a plastic faucet breaks off inside the pipe? What are the precautions when using a faucet? Here, I will introduce relevant content, so let’s take a look.

What to do if a plastic faucet breaks off inside the pipe

First, use a hacksaw to cut a notch in the pipe, and then use needle-nose pliers to slowly pull out the broken faucet piece from inside. Alternatively, you can saw a notch to create a leverage point and then use a screwdriver to gently tap and rotate it out in the opposite direction. Another option is to simply cut off the section of the pipe containing the broken faucet and connect a new pipe using a coupling.

Precautions for using faucets

1. When turning the water on or off, do not apply too much force; gently twist to open or close. Even for older faucets, there’s no need to use excessive force. Specifically, do not use the faucet as a handhold, as this can easily damage it. If the temperature is below zero degrees or if you notice any abnormalities with the faucet, you should first pour hot water over it for a while before turning it on.

2. During installation, it is advisable to hire a professional and avoid any impact with hard objects. The surface should be free from residual cement, glue, etc., or it may affect the sheen of the surface. Before installation, clean out any debris in the pipes to prevent clogs. It is normal for a newly installed faucet to drip a bit after use; this is due to residual water inside and should stop after closing.

3. Regularly maintain the cleanliness of the faucet to prevent oxidation. If there is grime, you can use toothpaste to clean it, helping to restore the faucet’s appearance. Be careful not to use steel wool to scrub the faucet, as this can damage the surface layer.

In summary, the above information outlines what to do if a plastic faucet breaks off inside a pipe and the precautions for using faucets. I hope this can help those who need it. For more information, please continue to follow Hawkrown.com.