Signs It's Time to Replace Your Floor Drain and How to Do It

Replacing a drainage floor drain can be a hassle, especially since they typically have a long lifespan. Here is a guide on how to replace a drainage floor drain.

How to Successfully Change Your Floor Drain: An Easy Tutorial

1. Use a cutter to remove the tiles around the drain, about 20 cm from the edges, and clean up the cut tiles and the mortar layer beneath them.

2. Use the cutter to loosen the cement around the drain, creating a recess that allows you to take out the old drain. Be cautious during this process to avoid dropping any debris into the drainage system, which could cause blockages. It is best to clean up any surrounding sand, stones, or cement chunks before removing the drain to prevent any falling debris.

3. Prepare the new drain and place it over the drainage opening to check if the height is suitable. If it is higher than the floor or flush, consider replacing it with a shorter drain. Once the right drain is selected, fit its base onto the drainage opening and ensure it is sealed and secured properly.

4. Apply waterproofing coating evenly around the drain and in the recessed area, making sure everything is covered. This step is important to protect the waterproof layer beneath, which may have been damaged during cutting, ensuring proper waterproofing measures are in place.

5. Install the drainage filter shaft, filter screen, and other accessories, ensuring all components are securely fitted.

6. Once the waterproofing has dried, you can re-tile the area and restore the floor's finish.

Choosing a Drainage Floor Drain

1. Material: There are three main types of materials for drainage floor drains: stainless steel, PVC, and brass. These materials primarily affect the filter core. Stainless steel filters have high impact resistance and durability, making them quite popular. PVC drains are generally more affordable and are commonly used in temporary structures or rental properties. Brass drains are considered more high-end and have better corrosion resistance.

2. Height: When selecting a drain, height is a crucial factor. If the height is insufficient, installation won't be possible. For higher drains, deep water seal drains can be used. If the height is average, a recommended T-shaped drain is suitable, while gravity flip-cover drains can also be considered for specific applications.

In conclusion：I hope this guide has provided you with a clear understanding of how to replace a drainage floor drain. For more related knowledge, feel free to follow our website.