Tips for Removing a Stuck Center Core from Your Drain

If you encounter a situation where the core of the floor drain cannot be removed, here are some methods to help you get it out.

How to Remove the Stuck Core of a Floor Drain

1. You can use a screwdriver to pry it up from the gap between the floor drain and the floor tiles. Alternatively, you can seal the gap around the track and then pull it upward to unscrew it.

2. You can apply a lubricant around the parts of the floor drain core. Once it is loosened, you will be able to unscrew it.

3. If necessary, you can use a cutting machine to remove the floor drain and replace it with a new one.

Precautions When Installing a Floor Drain

1. Before installation, remove the floor drain core to prevent debris from entering it, as this can affect its performance. For instance, if the distance between the bathroom drainage pipe and the floor is too close, you can trim it down slightly. This ensures that the floor drain is installed lower than the floor surface, while avoiding any damage to the waterproof layer.

2. If the distance between the bathroom drainage pipe and the floor is too far, you can use cement mortar for filling. This allows you to raise the drainage pipe, ensuring that the floor drain fits into the pipe. Before starting, make sure to block the drainage pipe to prevent debris from falling in and causing clogs. After filling with mortar, ensure that it is completely set before installing the floor drain into the formed pipe, ensuring that the floor drain fits tightly against the pipe wall.

3. Select the appropriate floor drain for your needs. For example, washing machines require a specialized floor drain because their discharge water pressure and volume are comparatively high. If you do not use a washing machine-specific floor drain, water may overflow onto the floor during discharge.

In conclusion：the methods to address a stuck core of a floor drain have been discussed here. You can use the above methods to remove it, while paying attention to detail during the process to avoid unnecessary troubles.