How to Remove a Round Faucet Aerator: A Step-by-Step Guide

If you want to remove the round faucet head at home, it may be a bit difficult. Generally, this task is usually handed over to males and requires tools. With the right tools, here’s how to remove the round faucet head:

How to Remove the Round Faucet Head at Home

1. First, you need to prepare a pair of pliers and a wrench. Start by using the pliers to grip the round faucet head to keep it stable, and then use the wrench to rotate it counterclockwise. As long as there are no rust issues, you should be able to remove it easily using the leverage principle.

2. If the screw connecting the faucet to the water pipe is too tight, use an adjustable wrench to grip the faucet and then apply a firm grip to the internal thread to create a gap where it connects. After that, it should be a bit easier to unscrew.

3. If the connections of the faucet are rusted, it may be challenging to unscrew it using the above methods. It’s best to remove the rust by spraying a rust remover on the connection area, waiting a few minutes, cleaning the surface, and then applying lubricant before attempting to unscrew it again.

Important Aspects to Note When Unscrewing the Faucet

1. During the process, be careful not to damage the faucet's valve core; otherwise, the whole faucet will become unusable, and you will need to replace it.

2. Before unscrewing, observe the faucet carefully. Some faucet heads may be tightly secured; if you try to unscrew them directly, you will likely just waste effort. Therefore, applying lubricant to the connection area will make the process much easier.

How to Clean the Faucet Filter Mesh

1. After removing the filter mesh, you can soak it in water mixed with white vinegar for 5 hours. The acidity of the vinegar will help remove impurities and dirt. Finally, rinse it clean under the faucet and wipe it dry with a cloth.

2. It’s also advisable to clean the filter mesh regularly; for example, every three months, to help resolve any issues with low water flow from the faucet.

In summary, to remove the faucet head, simply use the right tools. If there is rust, removing it first will make the process much easier; it's not that complicated.