Boosting Your Toilet's Flush Power: Easy Adjustments You Can Make

As we all know, toilets are essential sanitary ware in our daily lives. So the question arises: how can you adjust the flush power of a toilet? Let’s take a closer look.

How to Adjust the Flush Power of a Toilet

Open the toilet lid, and you will see two scales on the flush valve, marked in blue and red. First, set the red button on the flush valve to the lowest position, and adjust the blue button to the center position. Finally, reassemble it as it was. Alternatively, you can adjust the two long buttons located at the back of the water tank; simply turn them counterclockwise to increase the water volume.

Reasons Why a Toilet May Not Flush Cleanly

There are generally two main factors that can cause a toilet not to flush properly: the first is clogging in the toilet, and the second is insufficient flush power. Here are the specific situations:

一、Clogging

1、Mild Clogging

Toilet paper, hair, and other debris can cause mild clogs. In this case, you can use simple toilet unclogging tools, such as a toilet plunger.

2、Hard Object Clogging

If a hard object like a brush or a comb accidentally falls into the toilet, don’t waste time; directly seek help from professional toilet unclogging personnel.

3、Aging Clogging

Over time, toilets can accumulate a large amount of dirt on their inner walls. Severe scaling can block the water outlet, resulting in slow drainage. To resolve this, simply remove the buildup, and the toilet’s water flow will be smooth again.

二、Flush Power

1、Misalignment of the Toilet Offset

Many may not know that there is a bend in the center of the toilet's water outlet called the offset. If there is an issue with the offset, you will need to hire a professional to disassemble and reinstall the toilet.

2、Incorrect Operation

If the flush operation is not performed correctly, it can also lead to insufficient flush power. The correct method is to press the flush button for 2 to 3 seconds to fully open the flush valve, allowing the spray force to reach its optimal level.

In summary：after reading the above information, I believe you now have a further understanding of how to adjust the flush power of a toilet. If you would like to learn more related information, please continue to follow our website for more exciting content in the future.