Your Guide to Unscrewing a Circular Faucet Spout

The round faucet is quite popular in today's usage, and its overall effect looks pretty good. However, if the faucet encounters problems, it may lead to improper functioning, so timely repairs are necessary. Do you know how to remove the round faucet head and how to maintain the faucet? Let’s take a look together.

1. How to Remove the Round Faucet Head

First, use a dry cloth to wrap around the outer surface of the faucet and wipe off any remaining water. At this point, you will see a small flat surface on the round aerator. Use a small wrench to grip the aerator, and wrap the other end of the wrench with a cloth. This way, when you twist it off, you can better avoid damaging the faucet’s plating.

2. How to Maintain the Faucet

1. When installing the faucet, it is advisable to have professionals handle the installation to avoid any issues with details. Furthermore, before installation, the faucet must be thoroughly cleaned; excessive dirt left inside can easily cause blockage in the pipes, hindering normal water use later on.

2. During regular use of the faucet, be sure to turn it on and off gently. Avoid taking your frustrations out on the faucet, as this can easily lead to damage in the internal components, and even result in loose sealing valves. As a consequence, the likelihood of leaks will increase, severely affecting usage.

3. During daily use of the faucet, it is common for water to splash onto it. To prevent rust, it is important to promptly remove any water stains from the faucet. If too much dirt accumulates on the faucet, make sure to clean it immediately; otherwise, it will not only affect the aesthetics of the room but also shorten its lifespan.

This concludes our introduction to how to remove the round faucet head and how to maintain the faucet. I hope everyone has gained some understanding. Removing the round faucet is not difficult; just pay attention to some details, and this will help ensure a longer usage time for the faucet.