Home / Blog Center / Chargers / How to Remove a Stuck Toilet Tank Lid: Tips and Tricks
13/02/2025 | Hawkrown
If the lid of the toilet tank is damaged, it needs to be replaced in a timely manner to avoid affecting its use. If you find that you cannot remove the toilet tank lid, let's take a look at what to do.
What to do if you can’t take off the toilet tank lid
In most cases, you only need to unscrew the screws on the toilet tank lid to remove it. If you still can’t take it off, check if the latch of the tank lid is stuck. If there is, you can use a small knife or other tools to pry it open and detach the latch, allowing you to remove the toilet tank lid.
What is the process for replacing the toilet tank lid
1、First, check if there are any cracks on the toilet lid, especially where you lift the lid. If there are any, be particularly careful while removing it to avoid cuts from the cracks. It is advisable to wear heavy gloves before proceeding with the removal to ensure safety.
2、Once the toilet tank lid has been removed, do not place it anywhere haphazardly; instead, put it in a location where it won’t get touched. Next, turn off the main water valve for the tank, which is usually located on the left side of the toilet. After that, drain all the water in the tank. If there’s any residual water, you can use a towel or sponge to absorb it.
3、The design of the toilet tank is not very complicated; most of them are fixed with latches. You can find the inlet valve inside the tank, unscrew the nut and unhook the inlet valve, allowing you to remove it. At this point, install the new inlet valve that you have prepared and secure it.
4、After the replacement is complete, install all the tank's components and the new toilet lid, and tighten them with tools to ensure they are secure. Finally, turn on the water supply and check if it flushes normally, indicating that the repair is complete. If not, further adjustments may be needed.
In summary:I have introduced what to do if you can’t remove the toilet tank lid and the process for replacing it. Have you understood? If the toilet tank lid cannot be removed, identify the specific reason first and then take appropriate measures to ensure normal use in the future.