Home / Blog Center / Chargers / How to Fix a Leaking Toilet Tank: Step-by-Step Guide

How to Fix a Leaking Toilet Tank: Step-by-Step Guide

13/02/2025 | Hawkrown

Toilet tanks can develop some minor issues after prolonged use, such as leaking water. It is essential to address such problems promptly. Below is an introduction on how to deal with toilet tank leaks.

How to Handle Toilet Tank Leaks

First, check the position of the float arm when the tank is full. If the tank is full and water continues to flow into it, then there is a leak. In this case, try adjusting the float arm up and down. If the issue is with the tank's hose, check if the hose connection is loose. If it is loose, you can tighten the connection or replace it with a new one.

Tips for Choosing a Toilet

1、Look at Water-Saving Features

Although toilets use relatively little water, it's still important to consider their water-saving features when purchasing. Water-saving performance is not determined by the size of the tank, but rather by the design of the flushing system and tank components. When selecting a toilet, check the specifications; if the flush volume is below 6 liters, it indicates good water-saving performance.

2、Check the Drainage Diameter

When choosing a toilet, inspect the drainage diameter by attempting to fit your hand into the drainage opening. If you can fit your entire hand, it suggests that the drainage diameter is sufficient, which is indicative of better drainage performance.

3、Consider the Weight of the Toilet

Heavier toilets generally have higher density, which translates to better quality. Typically, a good toilet weighs around 50 pounds, while some higher-quality models can exceed 100 pounds. Therefore, weigh the toilet when selecting; the heavier the toilet, the better the quality.

4、Assess the Quality of Components

The quality of the toilet components is significant as well. Pay special attention during your selection. Plastic components are more prone to breaking and can be troublesome to replace. When you press the flush button, if you hear a loud sound, this indicates that the quality of the toilet components is good.

In summary:this concludes the introduction on how to handle toilet tank leaks. I hope this information is helpful. For more related information, you can visit the Hawkrown website.

Contact Us

Submission Successful

ok