How to Disassemble the Faucet Swivel: A Step-by-Step Guide

In modern home life, almost every household is equipped with faucets, whether in the kitchen or the bathroom. Faucets play a very important role in our lives. Sometimes, when a faucet breaks, people need to take it apart but may not know how to disassemble the rotating part. Below, I will introduce the process for everyone.

1. How to disassemble the rotating part of the faucet

First, turn off the water supply and disconnect the faucet from the water pipe to prevent water from spraying out and soaking your clothes during disassembly. Next, unscrew the screws on the rotating part; at this point, you will notice that the rotating part is slightly loose. After that, you can use a wrench to secure the rotating part and rotate it counterclockwise a few times to disassemble it.

2. What to pay attention to when installing a faucet

- Before installation, check if there are any debris inside the water pipe. If there is, you need to clean it out; otherwise, after installing the faucet, there is a high possibility of blockage during use, which will affect normal operation.

- To prevent the faucet from becoming loose, you can use screws and strong adhesive glue to tightly secure it to the countertop.

3. What to note when using a faucet

- First, whenever the faucet is not in use, it should be shut off promptly to avoid water waste. When washing dishes, it is best not to leave the water running continuously. Instead, fill the sink with some water first, wash all the dishes, and then add more water for rinsing. After washing the dishes, remember to close the faucet and tighten it, but do not over-tighten it. Over-tightening can lead to breakage over time, which can be very troublesome to deal with.

- Secondly, if you experience cross-flow of hot and cold water while using the faucet, be cautious. Hot water running through the cold water pipe can cause the pipe to rupture, and if you are too close, the splashing hot water could burn your face.

In summary, the above is what I wanted to share regarding how to disassemble the rotating part of a faucet. I hope this information can be of help to everyone. If you also want to disassemble a faucet, you can follow the steps outlined above. For more information, please follow Hawkrown.com.