Home / Blog Center / Chargers / Step-by-Step Guide to Replacing a Stuck Drain Cover

Step-by-Step Guide to Replacing a Stuck Drain Cover

12/02/2025 | Hawkrown

When the floor drain cartridge becomes clogged during use, it's important to use the appropriate method to resolve the issue. If you can't fix it, the only option may be to replace the cartridge. Below are some suggestions on what to do if you can't unscrew the floor drain cartridge.

What to Do If the Floor Drain Cartridge Can't Be Unscrewed

1. You can apply lubricant around the area to thoroughly lubricate it. Then, use a loosening agent to help loosen the floor drain cartridge and surrounding components, making it easier to unscrew.

2. Another method is to use a screwdriver to pry between the panel and the grout line of the floor tiles gently. This can help in removing the cartridge. Additionally, before replacing the cartridge, make sure to remove the anti-odor component; do not install it directly, as it may affect its odor prevention effectiveness.

How to Prevent Floor Drains from Clogging

1. You can cut a piece of pantyhose and stretch it over the floor drain. This will catch hair and debris, allowing you to simply throw away the pantyhose with the collected hair during cleaning, effectively preventing clogs in the drain.

2. Use a brush to clean the dirt from the cover and then rinse off the debris with water. If there are blockages in the pipes, you can use a drain cleaning agent, which works effectively on grease, hair, vegetable scraps, etc.

3. You can insert a hose into the floor drain and use a towel to block the drain opening. After turning on the water, press the towel down firmly over the drain to prevent backflow. Repeat this process several times.

4. Any object that falls into the drain can get stuck in the bends of the pipes. In this case, you can create a spoon-like shape using an iron broom handle to slowly scoop it out.

Summary:This concludes the information on what to do if the floor drain cartridge can't be unscrewed. You can try the above two methods to resolve the issue. It is important to use the correct method to avoid unnecessary complications. We hope this information is helpful to everyone.

Contact Us

Submission Successful

ok