How to Disassemble the Faucet Handle: A Step-by-Step Guide

In modern home life, almost every household is equipped with a faucet, whether in the kitchen or the bathroom. Faucets play a crucial role in our daily lives. Sometimes, a faucet may break, and people need to disassemble it but don't know how to remove the rotating part. Here’s a guide to help you.

1. How to Disassemble the Rotating Part of the Faucet

First, turn off the water supply and disconnect the faucet from the water pipes to prevent water from spraying out during disassembly, which could wet your clothes. Next, unscrew the screws on the rotating part; you will notice it becomes slightly loose. Then, use a wrench to secure the rotating part and turn it counterclockwise a few times to remove it.

2. What to Pay Attention to When Installing a Faucet

1. Before installation, check if there are any debris in the water pipe. If so, clean it thoroughly, as dirt can cause clogging issues once the faucet is installed, affecting normal use.

2. To prevent the faucet from loosening, you can use screws and a strong adhesive to firmly secure it to the countertop.

3. Precautions When Using a Faucet

1. First, timely close the faucet when it’s not in use to avoid wasting water resources. When washing dishes, it’s best not to let the water run continuously. Instead, fill the sink with some water first, wash all the dishes, and then add more water for rinsing. After washing the dishes, turn off the faucet and ensure it’s tightened, but not overly so. If tightened too much over time, the faucet may break, making repairs troublesome.

2. Additionally, if you experience mixing of hot and cold water when using the faucet, be cautious. Hot water flowing through the cold water pipe can cause it to burst, and if you are too close, the splashes of hot water can burn your face.

In summary, the above is what I have shared about how to disassemble the rotating part of a faucet. I hope this information is helpful for you. If you wish to disassemble a faucet, you can follow the steps mentioned. For more information, please stay tuned to Hawkrown.com.