Faucet Removal Made Easy: A Guide to Disassembling Your Sink Faucet

As we all know, faucets are essential hardware products in home decoration. Now, the question arises: do you know how to dismantle a basin faucet? What precautions should be taken during the disassembly of a faucet? Let me unveil the answers for you.

How to Dismantle a Basin Faucet

First, turn off the water supply valve and prepare a large bucket underneath the water pipe to collect any water. Next, use a wrench to disconnect the water inlet pipe from the flexible hose. If the flexible hose has become brittle and the components are rusted, you may need to use a saw to cut through the connection. Finally, use a saw to cut off any parts that are difficult to remove, and that completes the dismantling of the faucet.

Precautions for Dismantling a Faucet

1. In some households, the flexible hose under the faucet is usually located quite deep, making disassembly quite labor-intensive. This is because screws are often used to secure the valve seat to the main body during installation. In this case, it might be useful to use a long screwdriver to unscrew the screws counterclockwise from below, then push the valve and hose up from underneath. During this process, be particularly careful to avoid damaging the sealing ring on the valve seat.

2. Some water inlet hoses may be difficult to unscrew due to aging, leading to brittleness or rusted components. In this case, you can drip a few drops of oil on the rusty area before attempting to remove the faucet.

3. After turning off the faucet, if water continues to flow from the outlet, it may be due to a problem with the valve core of the inlet valve, such as debris blocking the bottom sealing ring, a damaged sealing ring, or impurities in the pipe scratching the valve core. These are all significant causes of leaks.

Methods for Using and Maintaining Faucets

During the installation of a faucet, it is important to clean out impurities in the pipes to avoid damaging the valve core, which could lead to blockages or leaks. Additionally, clean the surface of the faucet to ensure no residual substances are left behind.

Editing Conclusion: After reading the above introduction, I believe everyone has a better understanding of how to dismantle a basin faucet. For more relevant information, please continue to follow our website, where we will present more exciting content in the future.