Home / Blog Center / Chargers / Faucet Handle Removal Made Easy: No Screws Required

Faucet Handle Removal Made Easy: No Screws Required

12/02/2025 | Hawkrown

Most faucets come equipped with a handle that allows users to turn the faucet on and off. However, after prolonged use, the faucet handle may become damaged, necessitating its removal for replacement. So, how do you remove a faucet handle that does not have visible screws? Let's learn the steps together.

How to Remove a Faucet Handle Without Screws

If you want to remove a faucet handle that does not have visible screws, you typically need to master the correct technique for disassembly; otherwise, you may damage the faucet handle. Here are the specific steps to follow:

1. First, turn off the main water supply valve in your home. Then locate the red and blue dots under the faucet handle and gently pry them off with your fingers. This will reveal a small hole. Use a flashlight to examine the inside of the hole closely to check if there is a fixed screw, and whether it is a Phillips or flathead screw.

2. Next, use the appropriate screwdriver to remove that screw. Some faucet brands may have a square hole for an internal tool, which can be a bit more cumbersome. If you don’t have the correct disassembly tool, and you opt to use an alternative tool, be careful not to damage the screw head.

3. Once the screw inside the small hole is removed, you can take off the faucet handle. At this point, you will see a large copper nut. You can use an adjustable wrench to unscrew this nut, allowing you to also remove the valve core from inside the faucet.

4. If you need to replace the faucet valve core, you should carefully inspect the copper surface beneath the faucet valve core for any irregularities or fine sand particles. If there are any, clean them out thoroughly before installing the new faucet valve core.

That concludes the detailed guide on how to remove a faucet handle without visible screws. I hope this information is helpful to everyone. When disassembling a faucet handle, always ensure that you master the correct disassembly techniques; otherwise, you might damage your faucet and end up needing a complete replacement.

Contact Us

Submission Successful

ok