How to Disassemble a Bathroom Heater Light: A Step-by-Step Guide

As people's living standards continue to improve, the bathroom heater has become a common appliance in every household. Most homeowners will measure the dimensions of the heater first and then install the integrated ceiling heater when putting up the ceiling in the bathroom. However, like all things, bathroom heaters have a lifespan. If the heater bulb is broken, how can it be removed? Next, I will introduce how to remove the heater bulbs.

How to Remove the Heater Bulbs

Before dismantling the bulbs, make sure to turn off the switch to ensure that the heater is not powered. Start by unscrewing the four heating bulbs and the central light one by one. Then, you will see a spring hook at the corner; remove this hook to take off the plastic cover. Finally, use a screwdriver to remove the screws used to fix the heater’s frame to the ceiling, and you will be able to take it down.

Installation Precautions for the Bathroom Heater

1. Wiring

As we all know, the bathroom is a very humid place, so we must pay special attention to whether the wiring has waterproof features when purchasing wires. Bathroom heaters are high-power devices. Common household high-power appliances include refrigerators, air conditioners, and water heaters. When purchasing wires for these appliances, dedicated power cables are necessary, and multi-strand copper core wires are the best choice.

2. Switches

According to experts from Qijia.com, the switches for the bathroom heater should be installed with a waterproof panel. Make sure to choose reputable brands when purchasing, and the capacity of the switches must be above 10A. All wires should be concealed within the walls.

3. Installation Position

Many homeowners believe that the heater should be installed directly above the shower to maximize its effectiveness; however, this is incorrect. Because the heater heats up quickly and the shower water is also hot, in houses with low ceilings, it can easily cause burns. The best installation position for the heater is in the center of the bathroom.

Conclusion:The above content provides information on how to remove the heater bulbs. I hope it can be helpful to you. After reading the introduction, you should have a better understanding of the precautions for installing the bathroom heater, and if you have any needs later, you can refer to this information.