DIY Guide: Connecting a Shower to Your Classic Faucet

In the past, faucets were quite ordinary and had limited functions, primarily used for water output and not capable of connecting to other devices. Nowadays, there are many types and functions of faucets that not only serve as faucets but can also be connected to showers and washing machine inlet pipes, making them very convenient. So, if you need to connect a shower to an old-fashioned faucet, let’s go through the steps together.

How to connect a shower to an old-fashioned faucet

First, you can install a washing machine inlet adapter on the old-fashioned faucet, then connect a water inlet pipe to it. On the other end of the water pipe, install a T-connector, and finally connect the shower to the T-connector. This way, when you turn on the water, it will flow out from the shower. Alternatively, you can directly remove the old faucet and install a T-valve, then mount the shower onto it.

How to install a shower

1. First, prepare the shower and the water pipe.

2. Connect one end of the water pipe to the water outlet and the other end to the shower. When connecting the plumbing, be sure to properly install the rubber sealing rings on both ends to prevent water leakage.

3. Tighten all the connections of the water pipes. You may use tools to ensure they are tight, which will help prevent leaks.

4. Finally, turn on the faucet switch to let the water flow, and the shower installation will be complete.

How to choose a faucet

1. Inspect the surface. It should be smooth, without impurities, and have a good mirror finish.

2. Check the feel of use. When turning the faucet, if the gap between the switch parts is minimal and it operates smoothly without slipping, it indicates good quality. Poor quality faucets tend to have larger gaps and are more difficult to operate.

3. Examine the internal components. The components are usually made of solid brass for the valve body and handle, making them heavier. Lighter faucets tend to have a shorter lifespan and poorer corrosion resistance.

4. Look for labels. Many reputable manufacturers will have permanent product labels on the surface. If there are paper labels, be cautious about the authenticity of the product.

In summary, this is an introduction to how to connect a shower to an old-fashioned faucet. If you want to learn more about this topic, you can follow Hawkrown.com.