Your Ultimate Guide to Faucet Cartridge Replacement

The faucet not only adjusts hot and cold water but also controls the water flow. However, over time, it may experience leaks, which are usually due to a faulty valve core. We can simply replace the valve core to restore normal use. Replacing the valve core is relatively straightforward, and we can do it ourselves at home. Today, I will share the steps for replacing the valve core in a faucet.

1. How to Replace the Valve Core of a Faucet

1. Remove the Valve Core: First, turn off the main water valve. Then, take a screwdriver and insert it under the faucet handle, prying it to the left and right. Make sure to apply even force and proceed slowly until the valve core comes off.

2. Install the New Valve Core: After removing the old valve core, you will see a ring of blue rubber at the bottom of the valve core. The new valve core we are replacing should also have a blue rubber component. Once the valve core is installed, reattach the handle. The handle should be positioned so that when it is pulled up, the water is on, and when turned to the sides, the water is off. Adjust the handle direction appropriately, then secure it with screws and put the cover back on.

2. What to Consider When Buying a Kitchen Faucet

1. Height: For convenience, we should choose a taller faucet for installation in the kitchen. To meet various needs, the faucet should be able to rotate 360 degrees.

2. Length: Pay attention to the length of the faucet spout in relation to the sink. If your kitchen has a double sink, make sure that when the spout rotates, it can reach both sides of the sink. Many kitchen faucets have a head that can swivel side to side, making it very convenient to clean any part of the sink.

3. Durability: When purchasing a kitchen faucet, consider whether it’s convenient for washing vegetables, as its durability directly relates to the quality of its surface treatment process. Some brands have tested their faucets in acidic environments with a pH close to three at high temperatures for several hours without damage, indicating strong surface treatment craftsmanship. The quality of surface processing is the primary factor determining the lifespan of the faucet.

In summary, the above are the steps for replacing the valve core in a faucet and three important aspects to consider when purchasing a kitchen faucet. I hope this information will be helpful in your daily life.