Unclog Your Toilet Fast: The Wire Method Explained

In our daily lives, toilets can often become clogged. So how do you use wire to unclog a toilet? Let’s take a look with the editor.

How to Use Wire to Unclog a Toilet：

1、First, insert one part of a spring hook into the pipe. Hold the round pipe with your left hand and the handle with your right hand. Rotate the handle to push the spring forward.

2、When the lower end of the spring hooks onto the blockage, continue to turn the handle. The spring’s tension will increase, and once it reaches a certain level, you can pull it out along with the blockage.

Techniques for Unclogging a Toilet：

1、Often, simply flushing more water can help clear a clog. However, if the toilet is severely clogged, continuous flushing may worsen the situation, and it might be necessary to call a professional or use specialized tools.

2、If hair is causing the blockage, you can use wire to create a hook and stir it into the drain to tangle the clog around the wire. Then, pull the wire out along with the blockage.

3、For minor clogs, like those caused by tissue, you can use a plunger, which is a tool specifically designed for unblocking toilets. Determine the length of the spring based on the height of the blockage at the toilet entrance. Once tightened, apply pressure on the spring until the blockage clears.

4、For clogs caused by grease, food scraps, or plant leaves, you can use a pipe cleaner. This is a type of powder used for clearing any pipes. When using it, pour in about 50g in three increments, waiting about three minutes between each. After a few minutes, flush with hot water. For the last dose, wait ten minutes before rinsing with clean water to clear the blockage.

Summary：That’s all for today’s tips on using wire to unclog a toilet and various unblocking techniques. If you need more information, please continue to follow our website, where we will provide more exciting content for you.