How to Block the Drain of a Bathtub

When using a bathtub, it's important to first plug the drain to prevent water from flowing out. So, how does the bathtub effectively block the drain? The following is a brief introduction.

1. How to Block the Drain of a Bathtub

When purchasing a bathtub, it usually comes with a dedicated drain plug. You can simply use this plug to block the drain. If the drain plug is lost, you can plug the drain with a clean piece of cloth. Alternatively, you can buy a rubber stopper to use instead. It's advisable to avoid using a cork stopper, as it can easily deteriorate in a damp environment over time.

2. How to Clean and Use a Bathtub

1. Ideally, when using the bathtub, you should first apply anti-slip stickers to the bottom. The surface of the bathtub is very smooth, and using soap, shower gel, and other products can cause users to slip easily. When filling the tub for a bath, be careful not to overfill it; the water level should not exceed 42 centimeters, and the temperature should not be too high.

2. Before taking a bath, make sure to plug the drain and then set the water temperature and fill the tub as per the product instructions. After using the bathtub, remember to drain the water promptly. Additionally, avoid throwing flower petals or similar items into the bathtub, as they can block the drain.

3. It's essential to clean your bathtub regularly. When cleaning, you can first fill it with an appropriate amount of water and add white vinegar or baking soda for soaking. After a few hours, drain the water and wipe the tub down with a clean towel. Alternatively, you can use old newspapers to wipe off dust from the tub's surface.

Conclusion

This is a brief guide on how to block the drain of a bathtub. I hope this article provides reference and assistance for your future use and cleaning of bathtubs. For more related information, please continue to follow our website.