How to Replace a Broken Bathroom Heater Lamp: A Step-by-Step Guide

Nowadays, almost every household installs a bathroom heater, which has become an essential appliance in our daily lives. There are many products available in the market, and each has a certain lifespan. Over time, it is inevitable that some damage will occur. If the heating lamp of the bathroom heater breaks, how should it be replaced? What aspects should be paid attention to during installation? Let’s take a simple look together.

How to replace a broken heating lamp in a bathroom heater

1. First, turn off the power supply at home to ensure safety while replacing the lamp.

2. If your bathroom heater has four heating lamps, you should remove each one separately. Generally, they can be rotated, so use a small screwdriver to gently pry at the corners.

3. After removing the lamps, grasp the middle of the light bulb and rotate it counterclockwise to take it out, making sure that it doesn't fall down.

4. Install a new bulb, ensuring that you choose the same model. Otherwise, it may lead to installation issues.

5. After installation, turn on the power to check if it functions properly.

Aspects to pay attention to during installation

1. Since the bathroom is a relatively humid place, when purchasing electrical wires, ensure that they have waterproof features. Additionally, choose wires that match the specifications of the heater, opting for wires with a larger capacity to cater to the high power needs of the heating lamps.

2. Installation location. Generally speaking, the bathroom heater should not be installed directly above the shower area. This is unadvisable because the heater heats up quickly, and hot water from the shower can pose a risk. If you look up and see the heating lamps, it could easily cause eye burns. Therefore, the best installation position for the heater should be in the center of the bathroom, avoiding direct overhead placement.

3. When replacing bathroom LED lamps, make sure to choose the specific type of bulb and do not substitute with ordinary bulbs. Purchase from specialized stores that sell bathroom heater heating lamps.

Considerations when purchasing bathroom heater heating lamps

1. When purchasing, pay attention to ensure that the wattage is not too high and that the brightness is not excessive. If there are infants in the home, their eyesight is still developing, and they tend to be attracted to bright objects. Therefore, it is crucial to choose heating lamps with appropriate wattage, ideally between 30 to 40 watts.

2. Ensure that the heating bulbs have waterproof and explosion-proof properties. Without safety guarantees, non-waterproof heating lamps exposed to moisture can easily explode.

In summary:The above is a detailed introduction on how to replace a broken bathroom heater heating lamp. Friends who need to replace their bathroom heaters can refer to this information. To ensure safety, it is recommended to have professionals come in to assist with the replacement, in order to avoid errors that could lead to safety accidents.