Home / Blog Center / Chargers / Removing a Toilet: Everything You Need to Know

Removing a Toilet: Everything You Need to Know

08/02/2025 | Hawkrown

We are all familiar with toilets, and due to their frequent use, it is normal for them to experience damage. So how do you remove a toilet? Let’s take a look.

How to Safely Uninstall Your Toilet: Expert Tips:

1、Turn Off the Water Valve and Remove the Tank Cover

When removing a toilet, first check for any cracks on the toilet. It’s best to wear gloves to prevent cuts from sharp edges, and since toilets can be quite heavy, you should be careful not to pinch your fingers. Then, turn off the water valve behind the toilet and remove the tank cover, placing it in a spacious area to avoid damage.

2、Drain the Water from the Tank

Next, flush the tank to empty it. Press and hold the flush button until all the water is gone. If there is still a small amount of water left, you can soak it up with a sponge. If there is water in the toilet bowl, use a cup to scoop it out or again, use a sponge to absorb it.

3、Disconnect the Water Pipe and Remove the Tank

Then disconnect the water pipe attached to the toilet and pour out any water inside the pipe. Next, remove the tank, usually secured with bolts. Use a screwdriver to unscrew them. If the bolts are difficult to remove and keep turning, you can cut them off with a hacksaw to make removal easier.

4、Pry Open the Sealant Underneath

Typically, there is sealant under the toilet that needs to be pried open. Gently shake the toilet to loosen the sealant underneath, allowing you to lift the toilet.

5、Block the Drainage Pipe

After removing the toilet, place it in a safe spot. If the toilet is repairable, it might be reused in the future. It’s best to place a piece of cardboard or cloth on the ground and set the toilet on that to prevent damage to its base. After the toilet is removed, make sure to block the drainage pipe with a rag to prevent sewer gases from escaping. Additionally, clean off the old sealant from the base using a putty knife, as leftover sealant can affect aesthetics.

In summary:The above content outlines how to remove a toilet, and I believe everyone understands how it's done! The process of disassembling a toilet is relatively simple, and you can refer to the information above during the operation.

Contact Us

Submission Successful

ok